The various phases for inserting the batteries in the battery compartment are as follows:
1. Carry out the steps necessary to secure the machine, see paragraph “MACHINE SAFETY” on page 16.
2. Go to the front of the machine and remove the cap (4) from the tank (
)
3. Remove the plastic chassis (5) of the machine (
).
ATTENTION:
It is recommended to wear the appropriate PPE (Personal Protective Equipment), suitable for the work to be carried out.
The equipment needed for removing the bolts is not included with the machine.
for battery maintenance and daily recharging, you must fully respect the indications provided by the manufacturer or retailer.
ATTENTION:
all installation and maintenance operations must be carried out by specialized personnel.
before installing the battery, clean the battery compartment.
Check that the connectors on the cables supplied are functioning correctly.
ATTENTION:
check that the characteristics of the battery that you are looking to use are appropriate for the type of work to be performed.
ATTENTION:
Check the battery charge and the condition of the contacts on the battery.
ATTENTION:
the lifting hooks must not damage the blocks, connectors or cables.
Before inserting the batteries into the machine, remember to cover the terminals with a little grease to protect them against external
corrosion.
4. House the batteries in the compartment, positioning the poles “+” and “-“ opposite each other.
ATTENTION:
The battery compartment cover acts as a support surface when it is in a horizontal position, and the handle (5) acts as a
CONNECTING THE BATTERIES TO THE MACHINE'S ELECTRICAL SYSTEM (battery-powered versions)
The batteries should be connected so as to obtain a total voltage of 24V.
ATTENTION:
It is recommended that the electrical connection operations be carried out by specialized and trained personnel.
ATTENTION:
It is recommended to wear the appropriate PPE (Personal Protective Equipment), suitable for the work to be carried out.
ATTENTION:
to prevent an accidental short circuit use insulated tools to connect the batteries, and do not place or drop metal objects on
the battery. Remove rings, watches and any clothing with metal parts that may come into contact with the battery terminals.
When the connection is complete, reposition the chassis on the machine.
The equipment needed for removing the bolts is not included with the machine.
RECHARGING THE BATTERIES (battery-powered versions)
ATTENTION:
within a few minutes of noting the "discharged batteries" signal.
ATTENTION:
Never leave the batteries completely discharged, even if the machine is not being used.
1. Bring the machine to the battery recharging area.
ATTENTION:
either damage it, or be damaged through contact with it.
DANGER:
the room used to recharge the batteries must be adequately ventilated to prevent the accumulation of gases that leak from
batteries.
17
