JEEP WRANGLER
B
i
l i
White signal
wire and
b
d
Brown signal wire
A -pillar panel
power board
switch
wire
Sill panel
Step 5: Connection of signal wire: Pry the sill panel and A-pillar panel on the left above . Pull the brown signal wire into the vehicle
through the rubber grommet of chassis on the right side Then the white signal wire extends to the left side of the vehicle under the
19
through the rubber grommet of chassis on the right side. Then the white signal wire extends to the left side of the vehicle under the
carpet, and stick the power board switch to the left side under the steering wheel.
www.tmax.cn
