JEEP WRANGLER
Mounting Plate JP4
23
⑩
Φ
8 Flat
Step 2: Install the mounting plate as shown in the picture
(Tighten Torque 23Nm) .
⑩
Φ
8 Flat
Washer
⑪
Φ
8 Spring
Washer
⑰
M8
×
25 Hexagon Head Bolt
Drilling
Position
Front
Original hole for
installing motor linkage
Step 3: As shown in the picture drill a new hole on the side skirt based on the original hole (Dia of new hole is 6 5mm-8 5mm) Please
Original hole as
the base
New drilling hole as the base for
installing motor linkage
10
Step 3: As shown in the picture, drill a new hole on the side skirt based on the original hole (Dia of new hole is 6.5mm-8.5mm). Please
adjust the hole position due to different vehicles.
www.tmax.biz