JEEP WRANGLER
M8
×
20 Hexagon Head Bolt
Step 10: As shown in the picture, tighten the hexagon head bolt in
the step 10 to install the motor linkage. (Tighten Torque 23Nm)
Step 11: As shown in the picture, tighten the hexagon head bolt.
(Tighten Torque 23Nm)
Socket Cap Screw
Step 12:As shown in the picture, tighten socket cap screw to connect board and motor linkage (Tighten Torque 12Nm). Put the light belt into the
13
groove on the back of board after connecting insert and socket. This installation step is only for glare type.
www.tmax.biz