172-65627M-09 (SQ10) 18 Oct 2021
34
Storage
The openings of the unit are sealed with a label, plastic sheet, etc., and delivered
after taking measures to prevent rust and contamination.
Observe the storage instructions until the unit is installed on the piping. If the
following storage instructions cannot be observed, rust or foreign matter may void
the warranty.
Storage Instructions
(1) Store the unit indoors to prevent it from getting wet by rainwater, dew, etc.
(2) Store the unit in a place where the humidity is 80% or less.
(3) If the label or plastic sheet used for sealing or packaging of the unit is damaged,
replace it immediately or repair it with appropriate tape to maintain the seal.
(4) When repacking the unit, pack it with cushioning material so that it does not fall
or collide when moving or transporting.
(5) If the unit is stored for a long period of time (approx. six months or more),
unpack it at intervals of 6 months or less to check visually for rust and foreign
matter. If an antirust agent is used, replace it with a new one of the same
amount. After no abnormalities are confirmed, seal the opening as it was.
(6) Remove labels, plastic sheets, etc. sealing the opening just before installing the
unit.
