172-65627M-09 (SQ10) 18 Oct 2021
50
NOTE: When it is difficult to move the package into the facility by forklift:
When it is difficult to move the package into the facility by forklift, the package
should be moved using an unloading belt, while the unit is still packed in a
wooden box. The work must be carried out by a rigger.
The following is an example of how to move the packed unit. Ultimately, the
work should be carried out in the way that the rigger judges to be safest and
most appropriate.
The unit should be hoisted with an unloading belt of a length exceeding the
height of the package, supporting the package from the bottom of the wooden
box.
In addition, reduce the distance and time for which the unit is hoisted to a
minimum and move with care. Do not keep the package hoisted while waiting,
or move the package by hoisting it for a long time or distance or at high speed.
When signs of damage, etc. are seen in the wooden box while a force is
applied to the wooden box, stop hoisting immediately and lower the package to
the ground.
In addition, do not attempt to move the package using a reassembled wooden
box (a box that has been disassembled).
NOTE: When it is difficult to move the package into the facility while keeping the
package upright, such as through a door, and the package needs to be moved
in a tilted position, this movement should only be for a short time and distance.
The surface with the control panel should be facing upwards.
When tilted, ensure the unit is not tilted until it is almost horizontal.
Unloading belt
The length must be
at least 6 m.
Wooden Box
SteamAqua
Make sure that the
wooden box is lifted with
the belt from the bottom of
the box.