TL Elektronic Integra Efis TL-6560, Руководство по настройке

Страница: 22 / 38

Page 21
EFIS Setup Menu
Remote Compass & CO Guardian
Remote compass
TL elektronic Remote Compass is exclusive source of magnetic heading information for the Integra. The
connection to Integra is via CAN BUS.
If Remote Compass is not connected you will not have Heading data.
If Remote Compass is “connected” on Integra, but Remote Compass is missing or there is a problem with
communication, heading data display ERROR.
If Remote Compass is connected properly you will have correct Heading data.
Menu Settings
To calibrate your Remote Compass, you must input your location’s current magnetic inclination angle and intensity. Before doing this, you must
obtain these two values for the geographic location where you will be performing the calibration. Note that this procedure only needs to be done
once, prior to magnetic calibration. Moving the aircraft to another location does not require repeating this procedure.
Obtaining Magnetic Inclination and Intensity
1.
TL elektronic recommends The National Geophysical Data Centre (NGDC) of the National Oceanic & Atmospheric Administration
website at http://www.ngdc.noaa.gov/geomag-web/#igrfwmm to obtain inclination and intensity.
2.
Select your country and your city.
3.
Click on Get Location button to obtain coordinates or enter coordinates for your location directly.
4.
Click on Calculate button at the bottom of the page to obtain values needed for the INTEGRA.
• Menu Remote compass
•
Not connected
•
Connected
•
Settings
•
Declination
•
Inclination
•
Total Mag. Field
•
Build In
•
Calibration