Tivok T-HP38AB, Инструкция по установке и эксплуатации

Страница: 17 / 30

Tivok Energy T-HP38AB & T-HP72AB Heat Pump Installation Manual
15
ON/OFF TIMER SETTING
With this function, the heat pump can turn on or off automatically at a pre-set time. When “Timer on” is activated, the
heat pump is able to start and the “on/off” is controlled automatically based on the temperature set-point.
When “Timer Off” has been reached, the heat pump will be prevented from starting and the machine can no longer be
controlled automatically based on the temperature. This sequence will be restarted when the next “Timer On” period is
reached
Total of 3 ON/OFF timers can be set at once, and recurrence can be set to either everyday (default) or effective for only
one day. If timer setting status shows “--:--” on the bottom, the timer is invalid.
The examples shown below demonstrate how to set up the heat pump to switch on at 9:10 and switch off at 12:30 (1st
Timer); Switch on at 14:10 and switch off at 17:30 (2nd Timer) and switch on at 19:10 and switch off at 15:30 (3rd Timer)
1ST TIMER SETUP
ATTENTION
If you want to use the “Timer on / off” functions, the system time has to be correct, refer to previous page to set.
Step 1
Step 4
Step 2
Step 5
Step 3
Step 6
Press twice to start the ON
time setting
Press or to adjust
the hour value
Press or to adjust the
minute value
Flashing
Flashing
Flashing
Flashing Flashing