Tivok T-HP38AB, Инструкция по установке и эксплуатации

Страница: 25 / 30

Tivok Energy T-HP38AB & T-HP72AB Heat Pump Installation Manual
23
ERROR CODE CHECKING
When a failure occurs, it will show a failure symbol on the screen. Press for less than 2 seconds to check failure
code. You can press it again to cycle through further failure codes if there is more than one. Press or to exit.
In the failure code display area, “E-” means no failure. For a list of failure codes, please refer to the table below
COMMON FAILURE CODES
Failure Code
Low pressure protection/Pressure valve break down (system 1) P9
Low pressure protection/Pressure valve break down (system 2) EA
Refrigerant leak (system 1) PF
Refrigerant leak (system 2) EF
High pressure protection/Pressure valve break down (system 1) E4
High pressure protection/Pressure valve break down (system 2) E8
Water tank temp. sensor failure P3
Water outlet temp. sensor failure E1
Evaporator coil temp. sensor failure (system 1) P1
Evaporator coil temp. sensor failure (system 2) P5
Discharge gas temp. sensor failure (system 1) P2
Discharge gas temp. sensor failure (system 2) P6
Discharge temp. protection, discharge temp. is too high (system1) E3
Discharge temp. protection, discharge temp. is too high (system2) E7
Error phase or lack of phase with power supply PA
Ambient temp. sensor failure P7
Water flow fault or water flow switch breakdown Pd
LCD controller fault En
PCB memory fault E5