Tivok T-HP38AB, Инструкция по установке и эксплуатации

Страница: 3 / 30

Tivok Energy T-HP38AB & T-HP72AB Heat Pump Installation Manual
1
INTRODUCTION
GENERAL INFORMATION
Thank you for choosing a Tivok Energy Heat Pump. We
appreciate your business and your contribution to a
greener tomorrow.
This guide contains information regarding the installation
and safe operation of Tivok Energy Heat Pumps,
specifically the T-HP38AB & T-HP72AB.
The Tivok HP Series is designed for commercial buildings
such as hotels, offices, schools, hospitals, apartments etc.
as well as domestic hot water for houses. The systems are
modular to meet the demands of larger hot water projects.
The heat pumps can also be used for hydronic space
heating such as underfloor heating, fan coil units or
radiators.
They deliver a wide temperature range of hot water from
20°C to 60°C whilst being able to operate in extreme
ambient temperatures from -10°C to 43°C.
Tivok Energy Heat Pumps are designed for high efficiency
performance over the lifetime of operation, with an annual
average COP of up to 4.5. The water pipes and refrigerant
pipes are well insulated to minimise heat loss.
DOCUMENT SCOPE
This guide contains information regarding the installation
and safe handling of Tivok Energy Heat Pumps (from
hereafter referred to as “the heat pump“ or “heat pumps”).
Before installing the heat pump, please familiarise yourself
with the mechanical and electrical requirements, follow
these instructions carefully and observe all of the safety
precautions.
Please consult your supplier for additional information on
heat pump and tank system design, wiring, piping materials
and fittings.
CAUTION
All instructions should be read and understood before
attempting to install, wire, operate, and maintain the
heat pump. Ignoring to do so may result in system
failure. Contact with parts that are electrically active
such as terminals may result in burns or lethal shock.