Titaniumbaby 5940, Инструкция по эксплуатации

Страница: 45 / 52

EN
18 19
4.3 Installation of Group II/III and it is for the children whose
weight between 15-36kg.
• Before the installation, please take away the Harness system of
baby car seat. Note: The Baby insert, Harness strap, Harness buck-
le, Buckle pads& Shoulder pads should be stored away safely for
future use
( see 5.1 Removing the 5-point harness system and cover ).
Do not to use any load bearing contact points
other than those described in the instructions and marked in the
child restraint.The belt must be routed as shown in the instructions.
WARNING
• Adjust the height of the headrest to suit your
child.
• Push the ISOFIX con-
nectors directly into the
anchorages until heard an
audible sound “click”.
• Put the shoulder belt through
the shoulder belt guide under
the headrest.Place your child
into the car seat and pass the
belts through the bottom of
the seat
• Make sure the Lap belt is stretched as low as
possible over the child’s hips , within the belt gui-
des, and fastened into the buckle . The shoulder
belt must cross midway between child’s shoul-
der and neck.
Group II/III Car Belt Installation