EN
22
5.2 Refitting the 5-point harness system and cover
• After washing, place the cover on the
shell, pull the cover around adjus-
ting device down and insert the cover
around the edge of adjusting device.
• Pass the strap clip through the
strap clip slot. Then, pull both
sides of covers as shown in
picture and cover both sides of
holders.
• Pass the end of the shoulder
strap through the harness slot,
fix into shoulder strap axle, and
lock the shoulder strap axle to
the seat shell .
• Also put the end of the harness strap through
the harness strap slot and shell, fix into the
strap yoke. Make sure the seat straps can not
be rotated.
• Close the buckle, then fasten the
cover all around. Close the snap but-
tons on the back. Check that it works!
Care instructions
Содержание 5940
Страница 6: ...5 NL Onderdelen van het kinderzitje ...
Страница 51: ...Notes Notities NL NL EN ...