Titaniumbaby 5940, Инструкция по эксплуатации

Страница: 37 / 52

EN
10 11
3.2 How to adjust the belts, headrest and seat positions
3.2.1 Adjusting the belts
• Loosen the harness straps by pressing the
release button and pulling the harness straps as
far as you can.
Note! Do not
pull the shoulder pads.
3.2.2 Ten heights of the headrest
• The headrest can be set at five different heights
in group I mode with the shoulder belts axle in
place. There are five additional positions in
Group II & III mode once the shoulder belts axle
and harness straps has been removed.
• Press the button on the headrest handle on the
top of the seat. It is important to make sure the
headrest fit properly to head.
3.2-3 Stepless adjustment device
The recline angles of the car seat can be adjusted
by front knob. Rotate clockwise to add the
recline angles, to reduce in
the opposite, as shown from
the icon on the knob.
(Only For Group I)
The correct belt height of the shoul-
der belts is attained when the belt disappears into the shell
slightly above the shoulder of the child. Make sure that the
shoulder belts fit properly over the shoulders of the child.
IMPORTANT
Securing your baby