MINI CIRCULAR SAW 500W TTB689CSW
23
PLUG REPLACEMENT (UK & IRELAND ONLY)
If you need to replace the itted plug then follow the
instructions below.
IMPORTANT
The wires in the mains lead are coloured in accordance
with the following code:
BLUE =NEUTRAL
Brown = Live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured mark-
ings identifying the terminals in your plug, proceed as
follows. The wire which is coloured blue must be con
-
nected to the terminal which is marked with N. The wire
which is coloured brown must be connected to the
terminal which is marked with L.
Warning:
Never connect live or neutral wires to the earth terminal
of the plug.
Only it an approved 13AMP BS1363/A
plug and the correct rated fuse.
Note:
If a moulded plug is itted and has to be removed
take great care in disposing of the plug and severed
cable, it must be destroyed to prevent engaging into a
socket.
Connect
Blue to N
(neutral)
5 A mp fuse approved
to BS 1362
Brown L(live)
Cable grip
Outer sleeve
irmly clamped
