MINI CIRCULAR SAW 500W TTB689CSW
17
OPERATING INSTRUCTIONS
Note: Before using the tool, read the instruc
-
tion manual carefully.
Intended use
The tool is designed for longitudinal cutting of solid
wood, wood-like materials and plastics when equipped
with appropriate saw blades, or - when connected to a
suitable dust extraction system - for dry cutting of min-
eral materials, e.g., masonry. The tool is not intended
for commercial use.
Any other use or modiication to the tool is considered
as improper use. The producer is not responsible for
any damage or injuries that may result of it.
1. On/Off switch (Fig.1-2)
1. Check the correct function of the base plate before
plugging in the power cord.
2. Choose a corresponding saw blade and check its
condition and sharpness.
3. Make sure you keep the ventilation slots clear when
holding the tool.
4. Pull the On / Off switch and wait, until the saw blade
has reached maximum speed.
Press the safety lock switch and slowly push the tool
forward through the safely ixed workpiece.
5. Make sure the base plate always rests evenly on the
workpiece.
6. To switch off the tool, release the on / off switch.
Caution!
Do not overheat the blade tips of the saw
blade.
Always hold the machine by both hands.
Never start the machine with the blade in contact
with the workpiece. Start cutting only after the motor
reached its full speed. And always remove the machine
from the workpiece before switching it off.
Always carry out a test run before starting work and af-
Fig.1
Fig.2
2
0
15
1
0
5
0
