MINI CIRCULAR SAW 500W TTB689CSW
11
How the tool is being used and the materials being sanding.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles.
And the tool is being used as intended by its design and these instructions.
While working with this power tool, hand/arm vibrations occur. Adopt the correct working
practices in order to reduce the exposure to vibration.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING!
Identify safety measures to protect the operator that are based on an estimation of expo-
sure in the actual conditions of use (taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is running idle in addition to the trig-
ger time).
Vibration and noise reduction
To reduce the sanding of noise and vibration emission, limit the time of operation, use low-
vibration and low-noise operating modes as well as wear personal protective equipment.
Take the following points into account to minimize the vibration and noise exposure risks:
1. Only use the product as intended by its design and these instructions.
2. Ensure that the product is in good condition and well maintained.
3. Use correct application tools for the product and ensure they in good condition.
4. Keep tight grip on the handles/grip surface.
5.
Maintain this product in accordance with these instructions and keep it well lubricated
(where appropriate).
6. Plan your work schedule to spread any high vibration tool use across a number of days.
Emergency
Familiarise yourself with the use of this product by means of this instruction
manual. Memorise the safety directions and follow them to the letter. This will help
to prevent risks and hazards.
1.Always be alert when using this product, so that you can recognise and handle risks
early. Fast intervention can prevent serious injury and damage to property.
2.Switch off and disconnect from the power supply if there is any malfunction. Have the
product checked by a qualiied specialist and repaired, if necessary, before you put it into
operation again.
Residual risks
Even if you are operating this product in accordance with all the safety requirements,
