MINI CIRCULAR SAW 500W TTB689CSW
21
TROUBLE SHOOTING
Although your new mini circular saw is really very sim
-
ple to operate, if you do experience problems, please
check the following:
1.
If your saw will not operate check the power at the
main plug.
2. If your saw blade wobbles or vibrates, check that
blade bolt is tight, check that the saw blade is cor-
rectly located on the lange plate.
3. If there is any evidence that the blade is damaged
do not use as the damaged blade may disintegrate,
remove it and replace with a new blade. Dispose of
old blade sensibly.
4.
If laser will not working, check and change a new
battery.
5.
If your saw switch off automatically, allow your saw
cool down for minutes and press reset button to
continue.
TERMS OF USE
When all precautions have been taken and the previ
-
ous operations were done, you can start working.
The stress on the machine should not be such that
the speed is reduced by more than 25% for signiicant
periods.When overloaded happened, run the machine
empty for 3 to 5 minutes to cool the engine.
Do not use the saw with a cracked, blunt or damaged
blade.
Do not attempt to cut objects thicker than the maximum
cutting depth of the blade or when there is not enough
space under the object for the blade.
The saw blades have different types for different mate
-
rials. Please select it carefully and make sure it its with
the machine and your purpose before use.
CARE AND MAINTENANCE
- Always keep the tool clean, dry and free of oil or
grease.
- Wear safety glasses to protect your eyes whilst clean-
ing.
- For safe and proper working, always keep the ma-
chine and ventilation slots clean.
