Titan TTB336TCB, Инструкция по безопасности и эксплуатации

Страница: 13 / 19

TITAN TILE CUTTER 500W TTB336TCB
- Replace the outer flange and nut and tighten
securely with the two spanners provided (Fig 8).
Check that both blade flanges are in contact with
the blade.
- Unscrew the screw & washer from metal
bracket (Fig 9).
- Put the metal bracket under the plastic housing
then slide it into the slot (Fig 10 - 11).
- The metal bracket can be fixed into position using
the screw supplied (Fig 12). Ensure the metal
bracket is in line with diamond disc.
- Insert the blade guard into the notch then
tighten the screw (Fig 3).
- Put cover (45° vertical fence) back into position.
Fig 8
Fig 9
Fig 10
Fig 11
Fig 12