Wire Description
Pin Function
Description
9-GRAY
Hood Pin(-)
-
Input to detect ground when hood is
MUST BE CONNECTED.
10-GREEN
No Connection
11-BLACK
Ground(-)
-
System chassis ground input.
12-PINK
Brake Light (+)
-
Positive brake light switch input. Used to detect the
brake switch being applied.
13-VIOLET/
Tach(A/C)
-
A/C Tach signal input. Used to detect engine speed to
WHITE
indicate vehicle is running.
(Coil, Injector, cam/crank position sensors)
MUST BE CONNECTED
14-GRAY/
Diesel (-)
-
Programmable Wait to Start Input. Detects negative
BLACK
signals. This wire also acts as an “instant start wire” when ignition is off.
LOCK/ UNLOCK CONNECTOR (3pin red)
Pin Function
Description
1-GREEN
Lock (-)
-
Programmable LOCK output. (Menu 1)
2-EMPTY
3-BLUE
Unlock (-)
-
Programmable UNLOCK output. (Menu 1)
ANTENNA CONNECTOR (4pin Blue)
RF Antenna with Program Button and LEDs
AUXILIARY CONNECTOR (3pin white)
Pin Function
Description
1-WHITE/
Ground While Running(-)
-
250ma ground output while remote starter
VIOLET
is active.
2-BLACK
Ground(-)
-
250ma ground output.
3-RED
1)
-
250ma 12volt output.
open.
Important!
Never install an AUTOMATIC TRANSMISSION module
into a MANUAL TRANSMISSION vehicle!
INSTALLATION MANUAL
TS141A REMOTE STARTER