Ignition On
Off-On-Off
On
Press & Release
the Program
Button 3 Times.
For Menu 3,
press the
button
For Menu 1,
press the
button
For Menu 2,
press the
button
Entering Program Mode
Program Menus
Menu 1: User Settings ( Button)
This program menu is for the adjustments for the user and door lock options.
Menu 2: Additional Settings (
Button)
This program menu is for additional settings.
Menu 3: Starter Settings (
Button)
This program menu is for various remote car starter applications.
times, ON-OFF-ON-OFF-ON within three seconds.
NOTE:
Leave the key in the ON position
2)
Press and release the Program Button. The park lights will flash and the horn
(optional) will honk to confirm entering program mode.
3)
Select desired Program Menu (See below). The park lights will flash and
horn (optional) will honk to confirm the selected menu.
4)
Select Programmable Setting:
a)
Press and release
the Program Button the correct number of times to
select the desired Program Setting. The park lights and LEDs will flash
and the horn (optional) will honk to indicate the Program Setting that has
been selected.
For example
: 1 flash/honk= Program Setting 1;
2 flashes/honks= Program Setting 2; etc…
b)
Press and Hold
the Program Button until the park lights flash and the
horn(optional) honks to confirm the desired setting.
For example
: 1 flash/
honk= Setting 1; 2 flashes/honks= Setting 2; 3 flashes/honks= Setting 3.
c)
Turning the ignition key to the “Off” position or 30 seconds of no activity
will exit Program Mode. This will be confirmed with a light flash and a
long horn (optional) honk. The Program Menu may be changed at any
time by pressing the transmitter button (below), this will allow the
installer to jump from one menu, then quickly jump to another menu and
change another setting without re-entering Program Mode.
1)
With the ignition in the OFF position, turn the ignition key from “Off” to “On” 3
INSTALLATION MANUAL
TS141A REMOTE STARTER
