background image

The owner/user MUST INSTALL a CARBON MONOXIDE 
DETECTOR in the living area near to where the vehicle is being
stored or parked. It is the sole responsibility of the owner/user 
to keep the remote transmitters away from the reach of 
children and handle with care so that the system does not 
unintentionally start. When the vehicle is parked in an enclosed
/partially enclosed area (

ex: garage, car port...), 

being serviced

(

ex: oil change)

 or if the vehicle is loaned to an operator not 

familiar with a remote starter,  the system MUST BE placed in 
Service (Valet) Mode.

 

NEVER OPERATE THE SYSTEM IN AN ENCLOSED/ PARTIALLY
                                   ENCLOSED AREA!

MANUAL TRANSMISSION STARTERS the installation of a 
remote starter MUST only be done with a specified manual 
transmission starter.  It is the sole responsibility of the vehicles 
owner to insure that the vehicle is left with the transmission in 
neutral position when the remote starter is in use.  The manual 
transmission starter is designed to be an added measure of 
safety ONLY! The manufacturer does not guarantee or insure 
against any damages or loss of life that could result in the 
event of a remote starter starting while the vehicle is in gear. 
Manual transmission models are designed only to act as a 
deterrent against the vehicle starting in gear, this is the 
vehicle’s owner’s and operator’s responsibility. 

Important Safety Notes- Please Read The Following

INSTALLATION MANUAL                                                     
     

TS141A REMOTE STARTER                                                     
     

Содержание TS 141A





















Отзывы: