Wire Description
MAIN CONNECTOR (6pin)
Pin Function
Description
1-PURPLE
Starter Output
This wire will test 0V in OFF, ACCESSORY and in
the ON key positions. 12v during START ONLY.
2-ORANGE
Heater/Acc Output
-
This wire will test 0V in the OFF and START
key positions. 12-14V in the ACCESSORY and RUN key positions.
3-RED
12volt Input(30amp)
-
Supplies 12votls for the IGNITION, PARK
LIGHT and SELECTABLE outputs.
4-RED
12volt Input(30amp)
-
Supplies 12 volts for ACCESSORY and
STARTER outputs.
5-PINK
Ignition Output
-
This wire will test 0V in the OFF and ACCESSORY
key positions.12V in the IGNITION, START and RUN positions
6-PNK/WHT
Selectable Output
-
O
utput for 2nd IGNITION, 2nd ACCESSORY or
2nd STARTER.
AUXILIARY CONNECTOR (14pin)
Pin Function
Description
1-BLUE
Re-arm(-)
-
0.75 second pulse output when
is pressed and after
remote start shutdown. Used for factory alarm re-arm.
2-RED/WHT
Trunk Release(-)
-
Programmable output. Hold
or
button
for
3 seconds, output will stay active (max 5 seconds) or (-)park light.
3-GREEN/BLK
Dis-arm(-)
-
0.75 second pulse when
and is pressed and before
remote starter activation. Used for factory alarm dis-arm.
4-ORANGE
Ground When Running(-)
-
Output active during remote start.
/Starter Kill (-)
Programmable Starter Kill.
5-BROWN
Horn(-)
-
Output to activate factory horn.
6-BLK/WHT
No Connection
7-VIOLET
No Connection
8-WHITE
Park Light(+)
-
10amp positive output to activate park lights.
Programmable output
Continued on next page...
INSTALLATION MANUAL
TS141A REMOTE STARTER
