Titan PowerLiner 3100, Руководство пользователя

Страница: 12 / 28

12 © Titan Tool Inc. All rights reserved. ¤
Application Techniques
WARNING: Before changing gun position or
adjusting gun angle, follow pres-
sure relief procedure outlined on
page 5 of this manual.
The spray tip should be a distance of 6” from the sur-
face to maintain correct spray pattern. The spray tip is in the shape of an arrow. It should
always point at your work. If you are spraying a curb,
aim spray tip at the top corner of the curb.
1) Always spray with water rather than paint to confirm
gun position.
2) Adjust pressure to achieve proper atomization. Using
too much pressure will result in excessive overspray.
3) Always be sure that the Powrliner 3100 is in motion
before triggering and releasing the gun. This will apply
at cleaner more uniform line.
4) Always check gun position on paper or cardboard
before proceeding.
5) When applying parking lot lines, position the spray tip
so it is beyond the front end of frame. This will allow the
line to end at the curb.
6) Applying markings or lines that do not meet a curb,
adjust gun so it is parallel with front caster. This will
lessen the effects of bumps on spray pattern.
7) To adjust gun position loosen clamps A and C; this
will allow the gun to move up, down, forward or back
and out and in.
8) Should hose be removed for general painting or
stenciling, make sure when winding hose back up on
brackets, not to make the coil too tight. A tight coil will
transmit pump vibration to spray gun. This effect will
result in a wavy pattern.
9) When returning gun to gun mount assembly, make
sure that gun is as far forward as possible before tight-
ening knob B.