20
EN
Getting
started...
Before you start
TTB1300PRW by TITAN
If your water supply is potable water, ensure that the pressure washer
is connected to a non-return valve system (type BA).
A Type BA system prevents the contamination of drinking water and
must be connected to the water tap output.
The check valve is sold separately in stores.
Attach a suitable water hose to the water supply and then attach the other end
to the water hose inlet connector (19) of the product (Fig. 12).
Ø12.7mm
19
Fig. 12
1. Make sure the on/off switch (5) is in its off position.
2. Connect the plug (4) with a suitable socket.
WARNING!
Check the voltage! The voltage must comply with the
information on the rating label!
If using an extension cord it must be suitable for outdoor use with sockets
protected against water splashing. Ensure the extension cord is of the
proper size and type for your product (≥1.5 mm²)! Always use a residual
current device (RCD) protected supply.
Your product is now ready to be used.
35
37
37
38
30
25
22
Product
functions
Operation
Care
and
maintenance
Troubleshooting
Recycling
and
disposal
Guarantee
EC declaration
of
conformity
In
more
detail...
Connection to the water supply
Connection to the power supply
95813_IM_TTB1300.indd 20
95813_IM_TTB1300.indd 20
2020/9/23 上午9:23
2020/9/23 上午9:23