TTB1300PRW by TITAN
Trouble shooting
TTB1300PRW by TITAN
EN
In
more
detail...
36
Problem
Possible cause
Solution
4. Strong
pressure
fluctuations
4.1. Nozzle clogged
4.2. Water inlet volume is
too low
4.3. High-pressure hose is
leaking
4.4. Seals worn
4.5. Intake filter dirty
4.6. Air being sucked into
the system
4.1. Clean the nozzle
4.2. Increase water inlet
quantity
4.3. Replace high-pressure
hose
4.4. Contact our nearest
authorised service centre
4.5. Clean the filter
4.6. Check thickness of hose
fittings
5. Water leakage
from product
5.1. Seals worn
5.1. Contact your nearest
authorised service centre
6. Excessive
vibration/noise
6.1. Screws and nuts
loosened
6.2. Motor problems
6.3. Water inlet volume is
too low
6.1. Check screws and
nuts for tightness and
retighten as necessary
6.2. Contact your nearest
authorised service centre
6.3. Increase water inlet
quantity
7. No detergent
taken in
7.1. Soap tank not
attached
7.2. Detergent too dense
7.3. Deposits or restriction
in detergent circuit
7.1. Attach the soap tank
7.2. Dilute with water
7.3. Flush with clean
water and eliminate
any restrictions. If the
problem persists, contact
an authorised service
centre
Troubleshooting
8. No water jet
8.1. Trigger is not squeezed
8.2. Trigger lock is activated
8.3. No water supply
8.4. Filter is dirty
8.5. Hose blocked
8.6. Nozzle blocked
8.1. Squeeze the trigger
8.2. Deactivate the trigger
lock
8.3. Check water supply
8.4. Clean filter
8.5. Check hose
8.6. Check nozzle
95813_IM_TTB1300.indd 36
95813_IM_TTB1300.indd 36
2020/9/23 上午9:23
2020/9/23 上午9:23
