25
Operation
TTB1300PRW by TITAN
TTB1300PRW by TITAN
EN
In
more
detail...
General operation
1. Check the product, its power cord and plug as well as accessories for
damage before each use. Do not use the product if it is damaged or shows
wear.
2. Double check that accessories are properly fixed.
3. Always hold the product by the spray gun and lance. Keep the surfaces dry
to ensure safe support.
4. Ensure that the air vents are always unobstructed and clear. Clean them if
necessary.
5. Switch the product off immediately if you are disturbed while working by
other people.entering the working area. Always let the product come to
complete stop before putting it down.
6. Do not overwork yourself. Take regular breaks to ensure you can concentrate
on the work and have full control over the product.
operation
WARNING!
Do not operate the product when the ambient
temperature is below 0°C. Water will freeze inside the product and
damage it.
WARNING!
Do not operate the product with a closed water tap! This
leads to dry running and damage to the product! Rebound forces
result from pressing the trigger! Therefore, always hold the spray gun
with both hands! Pay attention to safe posture! Improper handling can
lead to injuries!
1. Assemble the product as described.
2. Turn on the water tap fully.
3. Turn the On/Off switch (5) to “I”.
4. Hold the spray gun (8) with both hands.
5. Direct the nozzle of the chosen attachment away from yourself towards the
surface to be cleaned (Fig. 19).
6. Press the trigger (8d) and direct the water jet to the object to be washed.
95813_IM_TTB1300.indd 25
95813_IM_TTB1300.indd 25
2020/9/23 上午9:23
2020/9/23 上午9:23
