TTB1300PRW by TITAN
Care and maintenance
TTB1300PRW by TITAN
EN
In
more
detail...
31
4. Check for worn or damaged parts. Replace worn parts as necessary or
contact an authorised service centre for repair before using the product again.
A cleaning needle (20) is supplied with this product and stored on the back
page of instruction manual.
Fig.
28
(Rotary nozzle and Vario nozzle)
20
18
17
Filter
1. Remove the water inlet hose connector (19) from the water inlet (14).
2. Use a damp tool to disassemble the water inlet hose connector (19)
(Fig. 29).
3. Rinse the parts with clear water (Fig. 30).
From time to time, according to the hardness of your tap water, calcium
deposits in the product and accessories. The strength of the deposits (and
thus the frequency of decalcification) depends upon the degree of hardness
of the water and how often the product is used. Check with your local water
company in order to establish the hardness of the water in your area.
Fig.
29
19
Fig.
30
Decalcification
NOTE:
Use a mixture of water and citric acid or vinegar for
decalcification.These substances are readily biodegradable and
environmentally friendly!
1. Make a mixture of one part vinegar and two parts hot water(≤ 50 °C) in a
suitable container e.g. in a bowl.
2. Lay the container e.g. accessory parts in the mixture.
3. Leave the parts in the mixture for approximately 12 hours.
4. Then rinse the parts with clear water.
TTB1300PRW by TITAN
95813_IM_TTB1300.indd 31
95813_IM_TTB1300.indd 31
2020/9/23 上午9:23
2020/9/23 上午9:23
