24
© Titan Tool Inc. All rights reserved.
Warranty
United States Sales & Service
1-800-526-5362
Fax 1-800-528-4826
107 Bauer Drive
Oakland, NJ 07436
www.titantool.com
Canadian Branch
1-800-565-8665
Fax 1-905-856-8496
200 Trowers Road, Unit 7B
Woodbridge, Ontario L4L 5Z8
International
1-201-337-1240
Fax 1-201-405-7449
107 Bauer Drive
Oakland, NJ 07436 USA
Material Safety Data Sheets (MSDS) are available on Titan’s website or by calling Customer Service.
Titan Tool, Inc., (“Titan”) warrants that at the time of delivery to the original purchaser for use (“End User”), the equipment covered by this warranty is free
from defects in material and workmanship. With the exception of any special, limited, or extended warranty published by Titan, Titan’s obligation under
this warranty is limited to replacing or repairing without charge those parts which, to Titan’s reasonable satisfaction, are shown to be defective within
twelve (12) months after sale to the End User. This warranty applies only when the unit is installed and operated in accordance with the recommendations
and instructions of Titan.
This warranty does not apply in the case of damage or wear caused by abrasion, corrosion or misuse, negligence, accident, faulty installation, substitution
of non-Titan component parts, or tampering with the unit in a manner to impair normal operation.
Defective parts are to be returned to an authorized Titan sales/service outlet. All transportation charges, including return to the factory, if necessary, are to
be borne and prepaid by the End User. Repaired or replaced equipment will be returned to the End User transportation prepaid.
THERE IS NO OTHER EXPRESS WARRANTY. TITAN HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED
TO, THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TO THE EXTENT PERMITTED BY LAW. THE DURATION OF
ANY IMPLIED WARRANTIES WHICH CANNOT BE DISCLAIMED IS LIMITED TO THE TIME PERIOD SPECIFIED IN THE EXPRESS WARRANTY. IN
NO CASE SHALL TITAN LIABILITY EXCEED THE AMOUNT OF THE PURCHASE PRICE. LIABILITY FOR CONSEQUENTIAL, INCIDENTAL OR
SPECIAL DAMAGES UNDER ANY AND ALL WARRANTIES IS EXCLUDED TO THE EXTENT PERMITTED BY LAW.
TITAN MAKES NO WARRANTY AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
WITH RESPECT TO ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY TITAN. THOSE ITEMS
SOLD, BUT NOT MANUFACTURED BY TITAN (SUCH AS GAS ENGINES, SWITCHES, HOSES, ETC.) ARE SUBJECT TO THE WARRANTY, IF ANY, OF
THEIR MANUFACTURER. TITAN WILL PROVIDE THE PURCHASER WITH REASONABLE ASSISTANCE IN MAKING ANY CLAIM FOR BREACH OF
THESE WARRANTIES.
Accessories
Airless Tip Selection
Tips are selected by the orifice size and fan width. The proper
selection is determined by the fan width required for a specific
job and by the orifice size that will supply the desired amount
of fluid and accomplish proper atomization.
For light viscosity fluids, smaller orifice tips generally are
desired. For heavier viscosity materials, larger orifice tips are
preferred. Please refer to the chart below.
The following chart indicates the most common sizes and the
appropriate materials to be sprayed.
Fan widths measuring 8" to 12" (20 to 30 cm) are preferred
because they offer more control while spraying and are less
likely to plug.
Liquid Shield Plus
Cleans and protects spray systems against rust, corrosion and
premature wear. Now with -25º anti-freeze protection.
Part #
Description
314-483 ...........4 ounce bottle
314-482 ...........1 quart bottle
Tip Size
Spray Material
Filter Type
.011 — .013 Lacquers and stains
100 mesh filter
.015 — .019 Oil and latex
60 mesh filter
.021 — .026 Heavy bodied latex and blockfillers
30 mesh filter
NOTE: Do not exceed the sprayer's recommended
maximum tip size.
Piston Lube
Specially formulated to prevent materials from adhering to the
piston rod, which becomes abrasive to the upper seals. Piston
Lube will break down any material that may accumulate in the
oil cup and keep it from drying.
Part #
Description
314-481 ...........4 ounce bottle
314-480 ...........8 ounce bottle
Miscellaneous
Part #
Description
490-012 ...........Hose coupling, 1/4" x 1/4"
730-397 ...........High pressure fluid Gauge
314-171 ...........Lubriplate, 14 ounce individual
314-172 ...........Lubriplate, 6 lb. can
700-1037 ..........Electrostatic discharge (ESD) wrist strap
Labels
Part #
Description
313-1691
740i logo label
313-1673
Warning label
(injection/explosion)
313-1847
Shock hazard label
313-1715
Pressure control knob label
313-1743
Indicator lights label
313-1638
“Titan” front label
313-1906
Infinity logo label
