After use
The golden rules for care
1. Release the trigger (9d) (Fig. 24).
2. Turn the on/off switch to “0” position.
3. Turn off the water tap.
4. Squeeze the trigger to release the pressure still present in the product.
5. Lock the trigger.
6. Separate the water hose from the water supply and then from the water inlet
hose adaptor (21).
7. Wind the pressure hose (3) onto the hose reel (2). Ensure that the hose is
not bent or twisted but winded up evenly.
8. Dismantle the accessories in the reverse sequence of the assembly
instructions if you are not going to use this product for a long period of time.
9. Check, clean and store the product as described below.
1. Keep the product clean. Remove debris from it after each use and before
storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of
the product.
WARNING!
Only separate the high-pressure hose from the spray gun
and the water hose from the product when no more pressure exists in
the system! Also ensure that the product is turned off and separated
from power supply!
WARNING!
Always squeeze the trigger to release the pressure still
present in the product first.
Always switch the product off, disconnect it from the power supply
and let the product cool down before performing inspection,
maintenance and cleaning work!
0
2-M
AX
1-E
C
O
O
FF
9d
Fig. 24
31
Operation / Care and maintenance
TTB2700PRW
byTITAN
EN
In
more
detail...