36
Troubleshooting
TTB2700PRW
byTITAN
EN
In
more
detail...
Suspected malfunctions are often due to causes that the users can fix
themselves. Therefore check the product using this section. In most cases the
problem can be solved quickly.
Troubleshooting
WARNING!
Only perform the steps described within these
instructions! All further inspection, maintenance and repair work must
be performed by an authorised service centre or a similarly qualified
specialist if you cannot solve the problem yourself!
Problem
Possible cause
Solution
1. Product does
not start
1.1. Not connected to power
supply
1.2. Power cord or plug is
defective
1.3. Other electrical defect
to the product
1.4. Trigger lock has not
been deactivated
1.5. Nozzle clogged
1.1. Connect to power
supply
1.2. Contact your nearest
authorised service
centre
1.3. Contact your nearest
authorised service
centre
1.4. Unlock the trigger
1.5. Clean the nozzle
2. Product does
not reach full
power
2.1. Extension cord not
suitable for operation
with this product
2.2. Power source (e.g.
generator) has too low
voltage
2.3. Air vents are blocked
2.4. Water inlet volume is
too low
2.5. High-pressure hose is
leaking
2.6. Seals worn
2.7. Intake filter dirty
2.8. Air being sucked into
the system
2.1. Use a proper extension
cord
2.2. Connect to another
power source
2.3. Clean the air vents
2.4. Increase water inlet
quantity
2.5. Replace high-pressure
hose
2.6. Contact your nearest
authorised service
centre
2.7 Clean the filter
2.8 Check tightness of hose
fittings
3. Oil leak
3.1. Seals worn
3.1. Contact your nearest
authorised service
centre
