33
Care and maintenance
TTB2700PRW
byTITAN
EN
In
more
detail...
Nozzle
Water filter
Decalcification
Remove any dirt deposits from the
nozzle (18/20) hole using the cleaning
needle (25) (Fig. 25).
1. Unscrew and remove the water
inlet hose adaptor (21) from the
water inlet (6).
2. Disassemble the water inlet hose
adaptor (21) (Fig. 26).
3. Rinse the water filter (21a) with
clear water.
From time to time – according to the nature of your tap water – calcium deposits
form in the product and accessories. The strength of the deposits (and thus the
frequency of decalcification) depends upon the degree of hardness of the water
and how often the product is used. Check with your supplier in order to find the
hardness of the water in your area.
1. Make a mixture of one part of proper vinegar and two parts hot water (≤ 50°C)
in a suitable container, e. g. in a bowl.
2. Lay the detachable accessories in the mixture.
3. Leave the accessories in the mixture for approximately 12 hours.
4. Rinse the accessories with clear water.
NOTE:
Use a mixture of water and citric acid or vinegar for
decalcification. These substances are readily biodegradable and
environmentally friendly!
40
18
25
20
Fig. 25
21a
21
Fig. 26
