37
Troubleshooting
TTB2700PRW
byTITAN
EN
In
more
detail...
Problem
Possible cause
Solution
4. Strong
pressure
fluctuations
4.1. Nozzle clogged
4.2. Water inlet volume is
too low
4.3. High-pressure hose is
leaking
4.4. Seals worn
4.5. Intake filter dirty
4.6. Air being sucked into
the system
4.1. Clean the nozzle
4.2. Increase water inlet
quantity
4.3. Replace high-pressure
hose
4.4. Contact our nearest
authorised service
centre
4.5. Clean the filter
4.6. Check thickness of
hose fittings
5. Water leakage
from product
5.1. Seals worn
5.1. Contact your nearest
authorised service
centre
6. Excessive
vibration/noise
6.1. Screws and nuts
loosened
6.2. Motor problems
6.3. Water inlet volume is
too low
6.1. Check screws and
nuts for tightness and
retighten as necessary
6.2. Contact your nearest
authorised service
centre
6.3. Increase water inlet
quantity
7. No detergent
taken in
7.1. Soap tank not attached
7.2. Detergent too dense
7.3. Deposits or restriction
in detergent circuit
7.1. Attach the soap tank
7.2. Dilute with water
7.3. Flush with clean
water and eliminate
any restrictions. If
the problem persists,
contact an authorised
service centre
8. No water jet
8.1. Trigger is not squeezed
8.2. Trigger lock is activated
8.3. No water supply
8.4. Filter is dirty
8.5. Hose blocked
8.6. Nozzle blocked
8.1. Squeeze the trigger
8.2. Deactivate the trigger
lock
8.3. Check water supply
8.4. Clean filter
8.5. Check hose
8.6. Check nozzle
