Titan 3515, Руководство по эксплуатации и запасным частям

Страница: 43 / 78

Titan Implement, LLC 43 3515 Flex-Wing Rotary Cutter
(423) 334-0012 February 2020
8. Storage
8.1 Storage Safety
At the end of the season, the rotary cutter should be
thoroughly inspected and prepared for storage. Repair
or replace any worn or damaged components to
prevent any unnecessary downtime at the beginning of
the next season.
WARNING
Rollover hazard
The rotary cutter is top heavy when the wings
are raised. To avoid injury or death from
rollover, store the cutter on a firm, level surface.
CAUTION
Personal Injury Hazard
Store the rotary cutter in an area away from
human activity. To prevent the possibility of
serious injury, do not permit children to play on or
around the stored rotary cutter.
N O TIC E
To prevent damage to the rotary cutter, store it in a dry,
level area.
8.2 Placing In Storage
1. Remove all entangled vegetation.
2. Thoroughly wash the rotary cutter with a pressure
washer or water hose to remove all clippings, dirt,
mud, or debris.
3. Raise the rotary cutter with the tractor hydraulics,
and install the transport lock on the lift cylinder.
4. Raise the wings with the tractor hydraulics and
install the wing uplock pins and their retaining pins.
5. Select an area that is dry, level, and free of debris
(inside a building is ideal). Move the rotary cutter
to its storage area. Disconnect the rotary cutter
from the tractor following the procedure in “6.11
Detaching From Tractor” on page 39.
6. Lubricate all grease points. Make sure all grease
cavities have been filled with grease to remove any
water residue from washing.
7. Touch up all paint nicks and scratches to prevent
rusting.
8.3 Removing From Storage
1. Attach the rotary cutter to the tractor following the
procedure in “6.3 Attaching to Tractor” on page
33.
2. Before placing the rotary cutter back into service,
replace any worn or defective parts and perform the
Pre-Operation Checklist.
N O TIC E
Wing cutting blades may become locked together
(overlapped) when the wings are raised for transport or
storage. Operating the cutter in this condition will result
in severe deck vibration. Inspect the wings for locked
blades prior to lowering the wings. Use a pry bar or
other tool to free any locked blades.