Titan 3515, Руководство по эксплуатации и запасным частям

Страница: 44 / 78

3515 Flex-Wing Rotary Cutter 44 Titan Implement, LLC
February 2020 (423) 334-0012
9. Service and Maintenance
9.1 Maintenance Safety
WARNING
Failure to comply with the following safety
instructions can and will result in serious injury and
possibly even death.
Personal
Protection
Equipment
Wear close fitting and belted clothing to avoid
getting caught in moving parts. Wear personal
protection equipment (PPE), which may include
hard hat, safety glasses, safety shoes, gloves, etc.
appropriate for the work site and working conditions.
Disconnect Driveline
To prevent injury due to possible unexpected
movement, disconnect the driveline from the
tractor PTO before performing any maintenance
procedure.
Damaged Parts Hazard
Do not use the rotary cutter if any parts are
damaged. If the rotary cutter is believed to
have a defect which could cause it to work
improperly, immediately stop using it and remedy
the problem before continuing.
No Unauthorized Modifications
Do not modify the rotary cutter or safety
devices. Do not weld on the unit.
Unauthorized modifications may impair its function
and safety and will void the warranty.
If the rotary cutter has been altered in any way from
the original design, the manufacturer does not
accept any liability for injury or warranty.
Crush Hazard
Always set the rotary cutter on safety
stands or on the ground and chock the
wheels when performing maintenance.
Good Working Condition
Keep all parts in good condition and properly
installed. Fix damage immediately. Replace
worn or broken parts.
OEM
Replacement Parts
If replacement parts are necessary, genuine
factory replacement parts must be used to
restore the unit to its original specifications. The
manufacturer will not accept responsibility for
damages as a result of the use of unapproved parts.
WARNING
Safety Shields and Devices
When completing a maintenance or service
function, make sure all safety shields and
devices are installed before placing the rotary cutter
in service.
Crush hazard
The wings may drop unexpectedly if the
uplock pins are not installed. To avoid serious
injury or death from crushing, always make sure the
uplock pins and their retaining pins are properly
installed whenever the wings are raised.
The rotary cutter is top heavy when the wings
are raised. To avoid injury or death from
rollover, make sure the cutter is on a firm,
level surface.
Trapped Air Hazard
When installing, replacing, or repairing
hydraulic system cylinders or parts, make
sure that the entire system is charged and free of air
before resuming operations. Failure to bleed the
system of all air can result in improper machine
operation, causing severe injury.
0
Zero Pressure
Relieve pressure from the hydraulic system
before servicing or disconnecting from the
tractor.
Explosive Separation Hazard
Replace any worn, cut, abraded, flattened, or
crimped hoses.
High-Pressure Hazard
Do not make any temporary repairs to the
hydraulic lines, fittings, or hoses using tape,
clamps, or cement. The hydraulic system operates
under extremely high pressure and temporary
repairs may fail suddenly and create a hazardous/
dangerous situation.
High-Pressure Fluid Hazard
Keep all hydraulic lines, fittings, and
couplers tightly secured and free of
leaks.
DO NOT use your bare hand to check for potential
leaks. Always use a board or cardboard when
checking for a leak.
Escaping hydraulic fluid under pressure, even a
pinhole size leak, can penetrate body tissue, causing
serious injury and possible death. If fluid is injected
into your skin, it must be treated immediately by a
doctor familiar with this type of injury.