16
8.2 MAINTENANCE BY OPERATOR
8.2.1 HYDRAULIC SYSTEM
8.2.2 GREASING POINTS
All moving parts have been lubricated at the factory and should be re-lubricated before the
first use and at least once every six months to prevent damage.
1�
Check the fluid level with the lift fully lowered and add fluid as required. Use premium
quality ISO-32, AW-32, or AW-46 hydraulic oil.
2�
Visually check all hydraulic hoses and connections for tightness before each use to
ensure proper working condition.
3�
Lightly oil the cylinder rods at least once every six months or when they become dry.
IMPORTANT: AFTER CLEANING WORKSHOP FLOOR OR LIFT, TO MAINTAIN
HOIST EFFICIENCY WE ADVISE TO LUBRICATE LIFTING ARM LOCKING
MECHANISM, AND SAFETY LOCKING MECHANISM. CHECK SAFETY LOCKING
MECHANISM IS FUNCTIONING CORRECTLY.
FIG. 3
SLIDE TRACKS:
•
The carriage assembly slide tracks should be greased every six months (or more
frequently in case of noise generation).
•
Slightly grease the slide tracks over their whole length using a brush.
ARM PINS:
•
Grease the arm pins to prevent excessive wear
Содержание HD2P-9000AF
