TIPTEL 822XT, Руководство по установке

Страница: 31 / 100

Setting up the computer
31
Configuration via ISDN
You can either establish the connection via one of the internal ISDN ports or exter-
nally via the public exchange.
Note: First you will have to make sure that your ISDN interface card/adapter
incl. CAPI driver has been installed correctly.
Install a dial-up network and select your ISDN card / adapter under “new connec-
tion”. Simply enter the preset call 99 as the call number, without a dialling code. User
name and password are identical with the LAN configuration (admin/admin as factory
default). For security the telephone system uses a separate IP address for each PC
for its own web configuration interface. The IP address you will have to enter in the
address bar of your browser you will find in the dial-up settings of your computer un-
der "Server-IP" or a similar headline.
Remote configuration via ISDN
The telephone system has only been installed at the customer's site but the configu-
ration is faulty or even not existent.
Ask the end-user to enter the key sequence L at any telephone or
at a point-to-point ISDN access (unlock remote configura-
tion/service). During the next 15 minutes you may log in to the customer's telephone
system via an ISDN adapter. You can use any of the customer's phone numbers. In
this case user name and password are the factory default settings "admin/Admin".
You may want to set up your own password protected remote access under "Sub-
scriber - Service Set-up". So, there is no longer the need to have your customer
unlock the system to enable you to configure the telephone system remotely. For se-
curity the telephone system uses a separate IP address for each PC for its own web
configuration interface. The IP address you will have to enter in the address bar of
your browser you will find in the dial-up settings of your computer under "Server-IP"
or a similar headline.