Tippmann A-5 RESPONSE, Руководство пользователя

Страница: 4 / 92

4
E
N
G
L
I
S
H
WARNING
Always keep the barrel blocking device installed except
when your marker is in use. Always make sure that the
Selector Switch is in the Safe mode (see instructions on
page 6) and the barrel blocking device is properly installed
on your marker according to the instructions to prevent
damage to property, serious injury, or death.
Barrel Blocking Device Installation Instructions
1. Insert the barrel into the barrel blocking
device, loop the cord over the top of the
receiver and position the cord at the back
of the grip as shown.
2. Adjust the cord length retainer up to
the back of the grip by pulling the cord
through it until the retainer is snug against
the back of the grip. Keeping the cord as tight
as possible, leave just enough cord elasticity
to pull the cord/retainer up over the top of the
marker to remove the barrel blocking device
for firing.
3. After the cord length is properly adjusted, lock
the cord length by tying a knot in the cord against the back of
the retainer as shown.
4. Before and after playing, inspect the barrel blocking device.
Replace the barrel blocking device if the sleeve or cord is
damaged, or there is a loss of cord elasticity.
5. Clean the barrel blocking device with plain, warm water and store out of sunlight in a dry
area when not in use.
Cord Length
Retainer
WARNING
This is not a toy. Misuse may cause serious injury or
death. Eye, face, and ear protection designed for paintball
must be worn by the user and any person within range.
We recommend you be at least 18 years old to purchase.
Persons under 18 must have adult supervision when using
this product. Read the Owner’s Manual before using this
product.
Barrel Blocking Device