timecode systems SyncBac PRO, Руководство пользователя

Страница: 47 / 64

GoPro HERO4™ Not Detected by Slave SyncBac PRO
If you have a SyncBac PRO set to run as a slave, it needs to synchronise with a
master device before it can be used with a HERO4™. This is because when you set a
SyncBac PRO to run as a slave, it expects to get its timecode from a master device
at least once.
1. Display the Main Screen on your SyncBac PRO (see Main Screen on page 39
2. Use the Up and Down buttons to scroll to the GoPro status screen.
3. Look at the Status and Link entries. If the Status is Not Ready and Link is Wait
RF Lock, it means that the SyncBac PRO slave has not synchronised with a
master (it is waiting for an RF lock with a master, which is when the clock is
set).
To resolve this issue, make sure the SyncBac PRO slave uses the correct channel for
the BLINK network and is in range of the master device. You will also need to make
sure the master device is set up correctly and connected to the BLINK network.
SyncBac PRO not Responding to Select button
In the unlikely event that your SyncBac PRO does not display the menu when you
press the Select button, try a Hard Reset (see page 49) .
SyncBac PRO Battery not Charging
If the SyncBac PRO battery is not re-charging when you use a mini USB charger:
1. Switch your SyncBac PRO off (see Switch SyncBac PRO On and Off on page 17 ).
2. Check that the mini USB port on the SyncBac PRO is clear. Mini USB ports can
get clogged with lint from pockets or dirt and dust from the environment.
3. Try using a different mini USB charger.
4. Try using a different mini USB cable.
If the problem persists, contact Timecode Systems for advice.
SyncBac PRO User Guide 47