Hard Reset
In the highly unlikely event that your SyncBac PRO becomes unresponsive and you
cannot access the menus, you can perform a 'hard reset'. A hard reset reboots the
SyncBac PRO. It is similar to turning the SyncBac PRO off and back on again - the
settings that were in place before the hard reset are kept. This is different to a
factory reset, where the existing settings are lost (see
).
To perform a hard reset:
1. Press and hold both the
Up
and the
Down
buttons at the same time. Don't
worry if the screen flickers a little as you hold the buttons down - this is
normal.
2. Keep the
Up
and
Down
buttons pressed down until the SyncBac PRO appears
to switch off.
3. Release the
Up
and
Down
buttons. The SyncBac PRO restarts.
SyncBac PRO User Guide
49
Содержание SyncBac PRO
Страница 6: ...vi SyncBac PRO User Guide...
Страница 58: ...58 SyncBac PRO User Guide...
Страница 63: ...SyncBac PRO User Guide 63...
