Example 1: Join a BLINK network
Let's say you are filming a chase sequence involving three cars. In each car,
you have set up a SyncBac PRO with a GoPro HERO4™ Silver, and you want
them to synchronise with a :pulse master. (You can also use the :pulse to
monitor and control the cameras remotely, via the BLINK Hub app).
The SyncBac PRO units have already been set up to use
RF Channel 4
, and
they are running as slaves. You want to add your :pulse to the BLINK network
and make it the master to the slaves.
You set up your :pulse so that it has the appropriate country/area setting for
the country in which you are filming and then you set it to use one of the
Set the Timecode Mode on page 53
). Finally, you
set the :pulse to use RF Channel 4 - the same RF channel that is used by the
slave devices.
With these settings in place, the master :pulse unit joins the RF channel 4
BLINK network and sets the timecode for the slave SyncBac PROs (as long as
the slave SyncBac PROs are within range of the master).
62
:pulse User Guide
Содержание mini basestation
Страница 6: ...6 pulse User Guide ...
Страница 106: ...Word clock 11 67 Standards 15 106 pulse User Guide ...
Страница 107: ... pulse User Guide ...