timecode systems mini basestation, Руководство пользователя

Страница: 41 / 108

Quick Set Up Free Run :pulse to Video Camera
To set up your :pulse to run independently of a BLINK network and synchronise with
a video camera:
1. Switch on your :pulse unit (see Switch :pulse On and Off on page 50 ).
2. Use the control knob to access the Timecode Mode menu.
3. Select the appropriate mode:
Settings Option
Further
Information
Timecode
Mode
Free Run/Jam-Ext to set your :pulse to run
independently of a BLINK network. You should
choose this setup if you want your :pulse to
synchronise with your video camera, but not
with any other Timecode Systems devices.
Set the
Timecode
Mode (see
page 53)
4. Choose the type of connection that your :pulse will use for communicating
with the BLINK Hub app. Use the control knob to access the Wifi Settings and
Ethernet Settings menus:
Settings Option
Further
Information
Wi-Fi
Settings
Turn on if you want your :pulse to communicate
with the BLINK Hub app wirelessly.
If you are not going to use BLINK Hub or you are
going to use an Ethernet connection instead,
turn wi-fi off to preserve battery power.
Set up Wi-Fi
for Data
Streaming
(see page
78)
Ethernet
Settings
Turn on if you want the :pulse to communicate
with the BLINK Hub app via a wired Ethernet
connection.
If you are not going to use BLINK Hub or you are
going to use a wi-fi connection instead, turn
Ethernet off to preserve battery power.
Set Up
Ethernet
for Data
Streaming
(see page
84)
:pulse User Guide 41