timecode systems mini basestation Скачать руководство пользователя страница 53

Страница: 53 / 108

Set the Timecode Mode

For time synchronisation, your :pulse can be used independently (free running) or as

part of a BLINK network, where it can be set as a master or slave. If it is set to be a

master, it will send its timecode to the slave devices in the BLINK network, and if it

is a slave, it will receive timecode from a master device.

You can set your :pulse to free run or operate as a master or slave, by using the

Timecode Mode

setting.

Timecode

Mode

Operation

Free

Run/Jam-

Ext

:pulse runs independently (free running). It is not part of a BLINK

network.

In Free Run/Jam Ext mode, you need to synchronise ('jam' ) the :pulse

with timecode from an external source. It can then be used

independently and it can output the timecode via its TC or TC/SYNC

port. For more details, see

Free Running and Jamming on page 47

Int-Gen

:pulse is the master unit and it uses the timecode values that you

apply in the :pulse's settings. The timecode will be sent to any slave

devices in the same BLINK network, and can also be sent to a device

that is connected to the :pulse via the TC port.

You can set the timecode for the :pulse manually, by using its Set T/C

setting (see

Set the Timecode for the Master on page 1

Ext-TC TX

:pulse is the master unit and gets its timecode values from an

external source, such as a camera (via a LEMO

5 connector). :pulse

then sends its timecode to the slaves in the same BLINK network. If

the external timecode source is disconnected, the clock in the :pulse

and the slaves 'freeze' at that time.

Ext-TC/C

:pulse is the master unit and gets its timecode settings from an

external source, such as a camera (via a LEMO

5 connector). :pulse

then sends the timecode to the slaves in the same BLINK network. If

the external timecode source is disconnected, the :pulse will use its

internal timecode instead. It will send this timecode to the slave

devices.

:pulse User Guide

Содержание mini basestation













































































































Результаты поиска

Содержание mini basestation

Отзывы:

timecode systems mini basestation, Руководство пользователя, Страница: 53 / 108

Результаты поиска

Содержание mini basestation

Отзывы: