27
8.3.3. MENU 02-03 Weekly program
NOTE
:
During programming, the start-up and shut-down times of the stove must not
overlap. At least 30 minutes must elapse between switching off and on!
Weekly program contains 4 independent programs that can be combined during the week.
Programs can be combined in such a way that either of them is active or not (OFF or ON).
Make sure that the programs are carefully adjusted and that the ignition and shutting off
times do not overlap. Programming procedure is as follows:
First 4 steps in programming are the same as setting the daily program.
Press the Key 3 (set), after which the text
MENU 01 SET CLOCK
will be
displayed. Then press key 5 twice, after which the screen displays the text
MENU 02 SET
CHRONO
. By pressing the key 3 (set), enter the timer setting menu and therefore the timer
setting menu.
ENABLE 1 CHRONO
will be displayed. Press Key 5 twice and the text
M-2-3
PROGRAM WEEK
will appear on the screen (Figure 26).
Image 26.
Press Key 3 (set) again, and the screen will display a message:
OFF M-2-3-01 CHRONO WEEKLY
(Image 27).
Image 27.
Use Keys 1 and 2 to activate the weekly timer on.
Use keys 5 and 6 to move through the menus, while keys 1 and 2 change parameters.
The menu layouts are shown in the following tables.
