16
7. USING THE STOVE
Follow this Manual always, so that the stove remains in good condition as long as
possible and to avoid unnecessary costs. Before initializing the stove, check to see if the
stove is well connected to the power source and the chimney.
7.1. Turning ON and turning OFF the stove
Note: During first igniting, pellet storage and feeder (pellet tranporter) are empty.
Read chapter "8.6 MENU M6
– INITIAL LOADING" on page 33, before starting
the stove.
To turn on the stove, change the main switch from position 0 to position 1.
Screen shows: clock, room temperature, operating regime (Power from P1 to P5) and OFF
(stove is turned off), as on Image 9.
The stove is being turned on and off by pressing the key 4. For minimum 4 seconds
until screen show START. (Image 10).
Image 9.
During start , indicators which presents stove components will light on. Exhaust fan
will be on as long stove is operational and for some time after stove is turned off (for safety
cooling reasons).
Image 10.
Message which will appear is
PREHEATING WAIT
(Image 11), which marks that igniter
has started to heat the pellet. Screen will show indicator of igniter and exhaust fan.
