TIL TST-4100 92-SC, Инструкция по установке и эксплуатации

Страница: 28 / 48

TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TST-4x00 92-SC Installation & Operating Instructions TiL 93RE126 Rev F
2-14
2.5 TRANSMITTER ADJUSTMENTS AND SETTINGS
The locations at which certain transmitter settings and adjustments can be performed are shown
in Figure 2.5. The top dust cover of the transmitter must be removed as described in paragraph
2.2.1 to access the Modulation setting. The plastic plugs must be removed prior to adjustment of
the remaining settings which are accessed from the bottom of the transmitter chassis. If
alignment procedures for these settings are required please consult the manufacturer.
2.6 OPERATIONAL CHECK
Perform an operational check of the transmitter after all adjustments. Ensure that the transmitter
operates in both the transmit and stand-by modes of operation, using the Operating Instructions
given in Section 3 of this document and the appropriate specified operating procedures for use
with the Remote Control Unit.
2.7 STORAGE
To store for an extended period, store unit in a dry place, in the original shipping container.