TigerStop TigerGauge, Руководство по установке

Страница: 12 / 20

12
TigerGauge programming mode allows the user to change TigerGauge settings.
1. Hold
P
for 3 seconds.
Note: TigerGauge will display a countdown. Hold until countdown is over.
2. TigerGauge is now in programming mode.
When in Programing Mode
P
Used to scroll through parameters Scrolls through values on a parameter
Used to change numeric values
Save parameter change
Resolution
The resolution setting is used to set TigerGauge’s measurement type from Inches to Metric. It is also used
to configure how many decimal places you want TigerGauge to display.
P
*
Press to scroll through the setting options.
Inch .01 - Measures inches up to two decimal places.
Inch .001 - Measures inches up to three decimal places.
Inch 1/16 - Measures fractional inches in increments of 1/16th of an inch.
Inch 1/32 - Measures fractional inches in increments of 1/32nd of an inch.
Inch 1/64
- Measures fractional inches in increments of 1/64th of an inch.
Options
Millimeter 1 - Measures millimeters in whole numbers.
Millimeter .01
- Measures millimeters up to two decimal places.
Millimeter .05 - Measures millimeters up to two decimal places in increments of .05 millimeters.
Millimeter .001 - Measures millimeters up to three decimal places.
Advanced Settings
Advanced Settings