Tiger TIGERFLEX Copia, Общие инструкции по сборке

Страница: 14 / 32

TIGERFLEX
®
APEX LOG CABIN GENERAL INSTRUCTIONS
14
tigersheds.com 0113 205 4189 sales@tigersheds.com
Step 8:
WALL ASSEMBLY STAGE 1
(MODULE PACKS: A, B & Q*)
• For central sections, use notched logs from Module Pack Q, which have a removed section as shown.
(No “Q” pack supplied with 6x6 Models)
• Secure through notch into log below using 1x S40 per notch, then secure into floorboards. Drill pilot hole at an
angle through log into floorboard, then secure in place as shown using 1x S40 per cut log.
(Detail E)
ADDITIONAL STEPS FOR DOOR POSITIONING
OR FULL PANE WINDOWS ON GABLE.
• If you are having a door or full pane window on the end, remove the full log used for boarding the floor and
replace with 2x cut logs as shown. Insert 2x 190mm spacers under the edge of cut logs.
(Detail F)
• Secure through notch into log below using 1x S40 per notch, then secure into spacer. Drill pilot hole at an angle
through log into floor spacer, then secure in place as shown using 1x S40 per cut log.
(Detail G)
Cut Log x 2
Notched Floor Log with
removed section x 4
E F G
S40 S40
S40 S40
190MM SPACER