www.maxcessintl.com
Tidland Leaf Shaft
MI 27L691995 1 L
Page 6
MAINTENANCE
Replacing a Valve
Shaft configurations vary. Valve may be installed in the end of the shaft or along its face.
1. Deflate the shaft. Remove all air.
2. Locate and remove the valve.
3. Apply thread sealant (according to manufacturer's directions) to the threads of the valve (unless
the sealant is pre-applied) and reinstall.
NOTE: Valves with pre-applied thread sealant are good for multiple uses. Always inspect the valve
threads for sufficient sealant; do not reuse more than six times.
4. Screw the valve into the shaft and torque to 8.8-10 ft·lbs (12-13.6 Nm).
