www.maxcessintl.com
Tidland Leaf Shaft
MI 27L691995 1 L
Page 8
MAINTENANCE
Using the hose clamp with bulk rubber tube material
Removing the hose clamp
Tidland recommends the use of a pincer for safe and easy removal of the hose clamp.
Standard pincer
Tidland Part No. 27L778957
Spring return pincer
Tidland Part No. 27L778958
1. With the pincer, squeeze the tangs
(1)
on the hose clamp until you can lift the load retaining hook
(2)
,
and then release the pincer.
2. Remove the fittings and use them again with new rubber tube material. (Remember to reinstall the tube
stiffener, if needed.)
3.
To close the clamp, squeeze the tangs until you can snap the load retaining hook into place.
