Tidland Maxcess 650 Series, Руководство пользователя

Страница: 15 / 16

www.maxcessintl.com Tidland Leaf Shaft MI 27L691995 1 L Page 15
MAINTENANCE
Installing Add-on Leaves
Add-on leaves are manufactured with the correct number of bolt holes required for proper installation.
Installing the leaves requires longer bolts, which are also supplied.
1. Align one add-on leaf with a leaf on the shaft.
2. Remove only the bolts from the existing leaf that correspond with the holes in the add-on leaf.
Do
not remove the existing leaf.
3. Set the add-on leaf on top of the existing leaf and install the longer bolts that were supplied with
your add-on leaves.
4. Torque the bolts according to the chart below.
5. Repeat procedure for all existing leaves.
1 Set screw clearance holes (for journals)
2 Existing leaf
3 Add-on leaf
4 Soc head flat screw (bolt)
Bolt size Torque spec
1/4-20 UNC
– 2B threads
10-12 ft·lbs (13-16 Nm)
3/8-16 UNC
– 2B threads
20-25 ft·lbs (27-33 Nm)